NEW ArtSign JSM3040U Laser Engraving and Cutting Machine. The ArtSign JSM3040U is equipped with a precision 50W water cooled CO2 laser that will engrave almost anything on almost any surface. The JSM3040U can also be used for cutting many different materials. This machine supports multiple graphic formats including PLT / DXF / BMP / JPG / GIF / PGN and TIF. Just connect the ArtSign JSM3040U to your PC and install the included NewlyDraw Software to Engrave almost anything on almost any surface. Engraves on Leather, Wood, Acrylic, Plastics, Painted Metals, LMM Coated Metals* and much more.

This engraver is not compatible with Windows XP PRO computers.

Watch the video below for a tutorial on Newlydraw software.

50 Watt Laser Tube L100cm x C160mm x D51mm $549.00 add to cart

Reflective & Focal Lens Set $199.00 add to cart

CW3000 Water Cooler/Pump Pumps/keeps water approx 24°C (75°F) $399.00 add to cart

- Sturdy, Well Balanced, Compact Size.
- High precision, high speed laser engraver.
- Red Dot Pointer and water flow sensor
- FDA Compliant
- Electric UP/DOWN adjustable honeycomb engraving table.
- Air Pump (blows smoke away from engraving spot)
- Non skid rubber feet for sturdy table top use.
- Exhaust Fan system included.
- Make professional laser engraving affordable.
- Powerful laser engraver with up to 50 watts of laser engraving power.
- Adjustable power and speed for perfect engravings on virtually any surface.
- Supports multiple graphic formats including PLT/DXF/BMP/JPG/GIF/PGN/TIF.

- Communication Interface: USB 2.0
- FDA Compliant: Yes
- Laser Type: CO2 Gas
- Engraving Table: 18 x 12.5 inches
- Max. Item Height for Optimal Performance - 1.6" (2.8" without honeycomb insert)
- Actual Item Height Clearance - 2.4" (3.6" without honeycomb insert)
- CO2 Laser Tube: 50 Watts
- Laser Power Supply: 50 Watts
- CO2 Laser Tube Life (hours): 1200-1500
- Engraving Speed: 0-400mm/s (0-15.7 in./s)
- Minimum Shaping Character: 1 X 1mm (0.04 X0.04)in.
- Resolution Ratio: 0.0254mm / 0.001 in. (1000dpi)
- Power: 110V / 60Hz
- Resetting Positioning: Accuracy less than or equal to 0.01mm (0.0004 in.)
- Motor Type: Stepper
- Software Supported: NewlyDraw 1 (included)
- Compatible with Windows 2000/XP HOME
- Gross Power: 800W
- Operating Temperature: 32-113F (0-45C)
- Graphic Format Supported: PLT/DXF/BMP/JPG/GIF/PGN/TIF
- Engraver For Curve Surfaces (Yes/No): No
- Water Cooling (Yes/No): Yes (optional)
- Exhaust System (Yes/No): Yes
- Product Dimensions: 44 x 28x 14 inches
- Product Weight: 128lbs
- Shipping Weight: 215lbs
- Recommended Spare Parts: Laser Tube, Focal/Reflection lens

We offer basic phone support which only includes help to engrave text from the software that is included with the machine. The software is called NewlyDraw. Everything you need to get started including the software manual is included with this item. Some installation and assembly required.

The NewlyDraw software that comes with this engraver only works on Windows 2000 and XP Home. We only give tech support on Windows XP Home as we do not have a windows 2000 computer. If you have something besides XP home then we cannot give any tech support.

This engraver is not compatible with Windows XP PRO computers.

Please Note: Laser Engravers are not something every one can operate. The included software can be complicated for some people and all CO2 laser engravers can be dangerous. You must be willing to take the time needed to learn the software and the operation of the laser engraver. The time needed will vary greatly depending on your knowledge. By purchasing this laser engraver, you are agreeing to our returns policy. Do not purchase this item if you do not agree with our returns policy. By purchasing this laser engraver, you acknowledge that laser engravers of any kind are dangerous and should only be operated by an adult with knowledge of operating laser engravers. You also agree that in no way will the seller of this item be responsible for any injuries incurred by this laser engraver.

One Year Warranty on Mechanical Parts
90 Day Warranty on Electrical Parts

MBKP International LLC agrees to repair or replace, at its option, any defective part or component covered by this warranty, provided there is no evidence of abuse and we first receive written notice of a defect within the applicable warranty period. Wearable items are not covered under warranty. Wearable items include, but are not limited to; laser tubes, focal lens, reflection lens, light bulbs and fuses. This warranty extends only to the original purchaser. MBKP International LLC makes no further warranty of any kind and specifically disclaims any warranty of merchantability for a particular purpose.

Repairs done by us would required the laser engraver to be shipped back to us or we can ship parts to you for you to replace the defective part. If you decide to replace a defective part yourself, MBKP International LLC is not responsible for any injuries that may occur while repairing this laser engraver. We highly recommend you use a qualified professional to replace any parts. Should you decide to return the laser engraver to us for repair, you would be responsible for making sure the laser engraver is properly packaged and insured for shipping. We highly recommend that you keep all packing materials for future use, if needed.

If shipping this laser engraver back to us for repair, shipping charges will be paid in the following manner:

1-30 days from date of purchase - We pay all shipping charges.
30 days to end of warranty - You pay shipping to us, we pay shipping back to you.
After warranty has expired - You pay all shipping charges.

Warranty is only valid if product was purchased from this website (www.mbkpinternational.com), unless otherwise stated by MBKP International LLC.

Please Note: Do not purchase this machine if you are not capable of making simple adjustments. By purchasing this machine you understand and agree that we do not offer any type of service or repair at your location. Any maintenance, adjustments or repairs that you cannot do yourself or with the help of us via email and videos will require the machine to be sent back to us for repair as mentioned above. The owner of this machine will need to be able to do basic maintenance such as adjusting a sensor, keeping moving parts lubricated, replacing a part, tightening nuts and bolts, replacing laser tubes, laser power supplies, reflective lens, focal lens, etc.. We can only offer to sale this machine at this low price because we do not offer on location tech/repair/maintenance service.

*LMM Coated Metals are metals that have been sprayed with an LMM or Laser Marking Material Spray. Typically a CO2 laser engraver like the one sold here will not engrave on metals unless it is painted metal. However, LMM sprays have recently been introduced to the market and if used correctly, will enable a CO2 laser engraver to engrave on many types of metal. We do not sell LMM spray but you can find it on the internet. However, we dont guarantee LLM spray will work as we do not manufacturer it. It would be up to you to learn how to use it. We do not accept returns on this item for the reason of it did not engrave on metal.